Utilities  
===============================
 subject  ClearHDD Program  
 
   As a low level format program, this program will erase all data on the HDD. Data should be backed up before running this program.  

Precaution  This program runs in DOS mode only.

Back up the data before running this program.

The target HDD to be cleared must be detected and recognized in CMOS Setup prior to running the program.  
 
 Running the program  
1. Enter "CLEARHDD 0 or 1" on the A:\ prompt. (Clearhdd 0 for Master, Clearhdd 1 for Slave)
2. If error is detected in the HDD, the following screen will be displayed. (Error is detected in HDD) 
